Sliding Patio Doors Repairs

Your sliding glass patio doors provide natural light and boost your home's energy efficiency. However, as time passes, they may begin to show signs of wear and tear that require some maintenance.

Luckily, the majority of problems with sliding patio doors are fairly simple to fix. Find out how to keep your sliding patio doors looking like new.

Tracks that are damaged or dirty Tracks

One of the main reasons for sliding patio doors that don't open is dirty or clogged tracks. Over time, the dust and grime of everyday use accumulates on the track and can cause the door to jam or even collapse completely.

A regular cleaning of sliding doors and their tracks in your household chores can help reduce the accumulation. Start by cleaning any large debris off the tracks and then wipe them clean using warm water and a non-abrasive cleaner like dish soap. Add a little vinegar to your cleaning solution can also aid in the removal of stubborn grease and dirt staining.

If your sliding door doesn't move smoothly after following these steps, it could be an indication of more serious damage and requires a professional repair or replacement. There are a few simple fixes you can make before calling in professionals to avoid expensive repairs or replacements.

It's important to place a doormat on the bottom of your sliding doors to help trap dirt before it has the chance to get to the tracks. Regularly trim any plants or shrubs that are located near your sliding door to limit the amount of debris that gets tracked into the tracks. Close the door correctly to avoid damaging the rollers and wheels. You can extend the life of your doors by maintaining them clean and lubricated.

Rollers that are misaligned

Sometimes, a patio may become out of alignment. It is usually due to obstructions such as dirt or other that can be easily fixed. However, it can be due to a bent track or roller. In the latter case you might be able to realign the roller by taking them out with their adjustment screws and cleaning them using ruby alcohol. These parts are often fragile.

If your doors are stuck, you can apply lubrication to the rollers. This will reduce friction and allow them to move more easily. It is best to apply a silicone-based lubricant because petroleum-based lubricants can attract dirt faster. It is also crucial to clean the tracks and rollers before applying lubricant.

After cleaning the rollers you can put them back on using their adjustment screws. It is recommended to use the same lubricant you used for cleaning them. When you reinstall the rollers, make sure you push them all the way into their channels. You can now test your door and see if it slides smoothly.

If the problem continues, it is possible to take the door off and check the tracks and rollers. If the tracks or rollers are badly bent or bent, they may have to be replaced. In such a scenario, it's a good idea to call in a professional for the installation.

Warped Glass

Sliding glass doors are ideal to bring in the outdoors and natural sunlight into a space, but they can also be susceptible to damages that require repair or replacement. Cracking, warping and fading are just a few of the most common problems. The materials that make up the sliding glass patio doors start to degrade when exposed to heat, sunlight and other environmental elements. The most common cause of cracking is impacts, such as the impact of a lawnmowers blade or ball that is smashed into the door. Fading is usually because of repeated exposure to sunlight and other elements.

If your sliding glass patio doors are difficult to close or open, it could be an indication that their rollers and tracks aren't functioning properly. This problem may be caused by accumulated dirt, rust, or debris on the track or wheels or due to a lack of or lubrication. This issue can be solved by regularly cleaning the rollers, tracks and removing obstructions.

Another reason your sliding patio glass repair doors might be difficult to open or close is because the locking mechanism has become faulty. It could be due to misalignment or wear and tear, or a combination of both. To fix this, simply adjust the locking mechanism by turning the hidden adjustment screws on the bottom.

Air leaks or drafts around your sliding upvc patio door repairs near me doors are a frequent issue that can significantly reduce their energy efficiency. These issues are typically caused by weather stripping that is worn out or poor alignment of the door. This can be easily resolved by replacing the weather stripping and re-aligning your doors.

Loose Handle

If the handle of a sliding door becomes loose, it can be quite frustrating and cause it difficult for people to open the door. This issue is usually caused by a misaligned locking mechanism, which can be corrected by loosening the screws that secure it and tightening them until they fit against the door jamb.

A loose handle can also result from the handle separating from the spindle which connects it to the interior or handles on the outside. This is usually the result of a combination of factors, including over use or wear and tear or just general ageing. If the issue isn't dealt with quickly, the handle may become loose and fall off.

To resolve this issue it is necessary to find the screws that connect the interior and exterior handles. They are usually hidden by tabs made of plastic, which can be removed using a flathead screwdriver (or in the case of some handle styles, a Phillips-head screwdriver). It's a good idea keep these screws safe so that you don't loose them.

Once the handles that were previously used have been removed and the old handles are gone, the next step is to take off the spindle that is loose. This can be done by pounding the end of the spindle using the hammer until it's removed from its position inside the door. Then, the new handle can be fitted by simply putting the spindle through the hole in the interior handle and then inserting the other end of the spindle into the hole in the exterior handle. After the handle is installed then tighten it by screwing back the screws, and then test to make sure the lock and unlock mechanism is working correctly.

Afflicted Weatherstripping

A cracked or worn weatherstripping can allow water and air to get through your patio glass door repair near me doors, compromising the comfort and energy efficiency of your home. It can let in moisture and create drafts, which can increase the cost of cooling and heating. It is good news that replacing damaged weatherstripping is an easy fix that doesn't require professional assistance. You can remove the old weatherstripping by either loosing the staples with the help of a screwdriver or by gently squeezing it with a putty knife and pulling it from the door. Clean the area and apply an additional layer of weatherstripping that is secured by a foam seal. This will stop leaks and increase the comfort.

If your sliding patio door isn't working as it should, you have to address the issue immediately to avoid further damage and to ensure that they are functional for years to be. Depending on how serious the problem is and the severity of the issue, an DIY solution or a professional repair/replacement could be the best choice.

The most common issues with sliding patio door repair service near me patio doors include filthy rollers caused by debris on the tracks, misaligned wheels and a loose handle. In most cases these issues can be fixed by regular maintenance and cleaning, such as lubricating the track, adjusting the rollers and tightening the hardware. If these measures are not working it is recommended that you seek out professional help to make sure that your patio is functioning exactly as it should. If you decide to replace or repair your patio door, make certain to verify its warranty information to make sure that it's covered by the manufacturer's warranty. This will save you money in the long run on repairs and replacements.