Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you're planning attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and repair the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

upvc window repair windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. In time, they could develop a number of problems that include sliding. A sagging window can cause problems with light, draughts or even security. It's important to take action as soon as you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. You'll first need to open the windows to access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws until they remain in position.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. The first step is to close the window and perform an initial test fit. The corner joints of the sash should be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you get up each morning to discover mouldy walls and wet floors. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is a relatively easy fix that can be completed by any DIY expert. Based on the severity of the issue the old caulking may need to be removed before a fresh layer can be applied. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is more with the seal rather than the frame. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens in a breeze. They can be replaced by any competent DIYer and are usually done within a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It is essentially a very simple procedure, but it is easier with someone else to help hold the frame in place.

Check that the upvc window repair hinges are closed and open in the proper direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photo via our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window open and close more easily. It can also lower the risk of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become misaligned due to wear, causing gaps where the sash and frame meet. If they are damaged beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, may be misaligned. Again, it is possible to just give them a good clean, but in certain cases, it may be necessary to have these replaced.

The next most common cause of draughts is the window seals. They can become worn down or damaged over time, and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it may be more cost-effective to replace them than to repair them. If you encounter any issues with your upvc window it is recommended to speak with an expert immediately.