Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation you'll need find some plastic spacers that help the new pane to fit perfectly into the window frame.

If you plan attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window repairs near me panes to ensure that any shards fall on the fabric, not onto the floor and could be trampled.

Once the glass is removed from the window, it's best to seal the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional comes out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues such as sliding. A sagging uPVC window can cause issues with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window repair near me which is sliding. First, you'll need to unblock the windows so you can get at the frame. Then, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fit. If you are happy with the fit of your window, you can tighten screws to keep them in the right position.

If you are unable to move the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. Often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial test fit. The corners of the sash should align with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. Windows that leak water do are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double glazed window repairs-glazed glass it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens in an ease. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's very simple to change a window hinge, but it's easier if someone helps you hold the frame.

Check that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain manner or because of inadequate installation at the factory. Sending us a picture via our website will often resolve the problem. We are always happy to give assistance.

It is also important to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. The ideal time to do this once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form between the sash and the frame. This can be easily repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, may also become misaligned, again it is possible to give them a thorough clean, however in some cases it might be necessary to have them replaced.

The next common reason for draughts are the window seals. They can become worn down or damaged over time and allow air to escape through the gaps. Installing high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is important to remember that all windows eventually get worn out and it could be more cost-effective to replace them rather than repair them. If you encounter any issues with your window made of upvc you should consult a professional immediately.