Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft with the Ghost Immobiliser. This system is discrete and does not require any additional key fobs.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence of up to 20 presses long. This will then allow the startup of your vehicle.

Simple PIN Code Change Process

With the rising rate of vehicle theft, many owners are looking to upgrade their security. There are many types of security devices that are sold aftermarket including tracking systems, alarms and immobilisers. Not all of them are equally effective at protecting your car. While a tracking device can assist you in locating your car in the case of theft, it will not prevent the crime from happening in the first place. Immobilisers, on the contrary are exactly what they say on the label - they disable your car's motor so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your car.

The ghost device makes use of the buttons on your car to generate a unique sequence which must be entered to allow the engine to begin. This can be done via the indicator stalk windows or heater buttons. In addition to this, there is also an app for mobile devices that can act as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This is especially useful when you need to surrender your car to a valet service or parking, as the immobiliser is activated, but not disabled.

The Ghost is a truly unique and innovative device that works in conjunction with the buttons on your vehicle instead of being a separate unit. It is not only an effective deterrent to theft of your vehicle, but it can be used on future vehicles you may own. This makes it a more cost-effective option than a traditional wheel lock.

Weatherproof small device

The Autowatch ghost immobiliser is a sophisticated security system that guards your vehicle from key cloning, hacking and ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly through the CAN bus to disable the motor. It can be plugged into the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are the most common method used by car thieves to circumvent the immobilisers in place.

The advantage of using CAN data is that it runs silently compared to traditional systems. It isn't detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by conventional diagnostic tools. The Autowatch ghost alarm installation immobilise (https://paulsen-skriver-2.technetbloggers.de/) does not use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, centre console, or doors, to create a unique disarming sequence. You can make this sequence as long as 20 presses for added security. The iPhone app only allows one connection, and comes with an individual pairing code for the installing ghost immobiliser. All communication between the two devices is protected.

The Ghost also stops thieves from stealing an additional key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run if a valid PIN code has been entered. It is possible to operate temporarily in Valet/Service mode (with the appropriate parameters, like 30mph speed limit) which means you can hand your car to valet or service without needing to enter the code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a customized code. The system can be turned on and off through your smartphone's app without the need for additional wires.

The standard factory immobilisers function by using a transponder, which is integrated into the key. It transmits a message to the ECU. The car will start when the correct code is sent. However, if a transponder from a different vehicle is used instead, the immobiliser will not recognise it. This enables the vehicle to be stolen and started. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It shields you from hacking or key cloning and even key theft. The only way thieves could steal your vehicle is physically towing it away, and even then they wouldn't be allowed to drive it.

audi rs4 ghost installer makes use of the buttons on your vehicle, including the indicator stalk, steering wheel and door panels to generate a unique, changeable PIN code sequence that must be entered before you can drive. This is done without any extra hardware, such as a keyfob. It can take up to 20 presses. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code-grabbing techniques to determine if the system has been set up.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is concealed within the vehicle, so it cannot be removed or disabled by thieves. It's also harder to remove than a car alarm, which requires disarming using a button sequence. This makes it a fantastic alternative to an GPS tracking device which can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You don't need to go far on social media to see stories or even videos of vehicles that have been taken by thieves using the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow the vehicle to start without the original keys.

Our Ghost immobiliser combats this issue and offers an additional layer of protection to stop your vehicle from being stolen when it is targeted by thieves. It creates a unique pin code by pushing the buttons on your steering wheel, door panel and on the centre console. The unique pin code is entered alongside your original key fob in order to prevent the engine from starting. The unique PIN for override can be found on the black card that you will receive after installation. It is simple to remember as there are no LED indications.

The device is hidden inside the vehicle's wires and does not emit radio signals, therefore it isn't able to be identified by modern thieves using diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to the tracking device.

Unlike most other security systems that use a relay inside the engine bay, these CANBUS Immobilisers connect with the car's ECU and BCM via CAN data bus (brand dependent). This allows them to block the vehicle completely by sending an electronic block to the ECU and engine.

They can also be connected to a separate alarm immobiliser, tracker or alarm. This must be specified prior to the installation. They are also service/valet-mode compatible and a great alternative to a tracker if you are having your car in for an electrical fault at the dealership.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen without the owners keys. It's now easier than ever to steal your pride and joy thanks to the availability of key cloning devices and door lock picks. To stop this, we are now offering the autowatch ghost installers birmingham Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your car has been stolen.

It connects directly to your car's ECU (Engine Control Unit) through the CAN data loop. It is completely silent since it doesn't use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also prevents the addition of an additional key or replacing the ECU to get around the system, since only the correct PIN code can allow the engine to start.

The device is hidden inside your car and is accessible via buttons on your steering wheel, center console and door panels. Before you can start your vehicle, you must enter a unique and reversible PIN code that can be as long as 20 numbers.

This is the very first aftermarket CAN-bus immobiliser that has been created. It can prevent your vehicle from being started or driven in the event that you do not enter a PIN number first. If the device is in armed and you attempt to drive away, it will display an indicator on your dash which will flash on a regular basis for approximately 300m, if you enter your PIN code during this time, it will deactivate the anti-hijack and your car will continue to operate just as normal. If you do not enter your PIN code at this time the indication will keep flashing & will require a new PIN code every attempt to start your vehicle.